Cisco Model 6109 6 MHz Off-Air Reference (NTSC) Guide De Montage
Chapter 5 Advanced Operations
402
78-4021139-01 Rev D
ii Click Commit Changes.
iii Select Read from the ConfigFileUpdate drop-down box.
iv Click Commit Changes.
iii Select Read from the ConfigFileUpdate drop-down box.
iv Click Commit Changes.
b On DNCS, delete Service Groups from SdvSm:
i On the DNCS Service Groups page, select each service group to be
migrated one at a time and edit.
1. Set PrimaryServername to None.
2. Save settings.
1. Set PrimaryServername to None.
2. Save settings.
c On USRM, delete Service Groups from Resource Manager:
i Remove Service Groups designations from QAM Output ports.
1. Run qams_<servername>_sgDelete.txt by entering the filename on the
ResourceManager.Software page in the ConfigFileName field.
2. Click Commit Changes.
3. Select Read from the ConfigFileUpdate drop-down box.
4. Click Commit Changes.
2. Click Commit Changes.
3. Select Read from the ConfigFileUpdate drop-down box.
4. Click Commit Changes.
ii Delete Service Group.
1. Run sgDelete_<servername>.txt by entering the filename on the
ResourceManager.Software page in the ConfigFileName field.
2. Click Commit Changes.
3. Select Read from the ConfigFileUpdate drop-down box.
4. Click Commit Changes.
2. Click Commit Changes.
3. Select Read from the ConfigFileUpdate drop-down box.
4. Click Commit Changes.
3 Add (deleted) Service Groups to new servers.
a Assign Service Groups to the new USRM servers:
i On the DNCS Service Groups page, select each service group to be
migrated one at a time and edit.
1. Set PrimaryServername to <New USRM Server>.
2. Save settings.
1. Set PrimaryServername to <New USRM Server>.
2. Save settings.
b Add QAMs:
i In an SSH session to the USRM server, copy the
qams_<servername>_sgMigrate.txt to qams_<servername>.txt.
1. From the /opt/usrm/ConfigFiles directory, type cp
1. From the /opt/usrm/ConfigFiles directory, type cp
qams_<servername>_sgMigrate.txt qams_<servername>.txt, and then
press Enter. The USRM will automatically load the new file.
c If zones are being used:
i In an SSH session to the USRM server, copy the zone_sgMigrate.conf to
zone.conf. The USRM will automatically load the new file.