Cisco Model 6109 6 MHz Off-Air Reference (NTSC) Guide De Montage
USRM Software Re-installation
78-4021139-01 Rev D
405
USRM Software Re-installation
Re-Installing the USRM Software
The USRM software RPM file is a Red Hat Package Manager file that contains all the
executable programs and files necessary for the operation of the USRM.
Note: The USRM software comes pre-installed. If the server becomes corrupted, or
Note: The USRM software comes pre-installed. If the server becomes corrupted, or
otherwise inoperable, you will have to re-install the operating system and the USRM
software in that order.
Follow these steps to re-install the USRM software RPM file.
1 Make sure that the operating system is already installed.
2 Log into the server as user "root" using the default password "generic".
3 Insert the USRM Application CD in the CD-ROM drive.
4 Type the following command at the system prompt and press Enter:
Follow these steps to re-install the USRM software RPM file.
1 Make sure that the operating system is already installed.
2 Log into the server as user "root" using the default password "generic".
3 Insert the USRM Application CD in the CD-ROM drive.
4 Type the following command at the system prompt and press Enter:
mount /dev/cdrom /mnt/cdrom
Note: Be sure to include the spaces in the command.
5 Type the following command at the system prompt and press Enter:
cd /mnt/cdrom
6 Type the following command at the system prompt and press Enter:
ls usrm*
Result: The name of the RPM file displays showing the version, release, and
operating system numbers. You need this information to perform step 7.
Note: The RPM file name is in the format usrm-VERSION-
Note: The RPM file name is in the format usrm-VERSION-
RELEASE.OS.i386.rpm; where VERSION and RELEASE are the current version
and release numbers and OS is the current operating system. For example:
usrm-1.4.1-8.el5.i386.rpm; where 1.4.1 is the version number, 8 is the release
number, and el5 is Enterprise Linux 5.
7 Type the following command at the system prompt and press Enter:
rpm –Uvh usrm-VERSION-RELEASE.OS.i386.rpm
Note: Replace VERSION, RELEASE, and OS with the numbers obtained in step
6.
Result: The installation is complete.
Result: The installation is complete.