Cisco Model 6109 6 MHz Off-Air Reference (NTSC) Guide De Montage

 

78-4021139-01 Rev D 

409 

 

The usrmrestore script causes the previously stored backup files to be reinstalled 

onto the USRM. This script requires the user to specify the full path and filename. 

Example 
To restore the filename SdvSrv01.25Aug2009.tar.bz2, which is stored in the root 

directory: 

usrmrestore /root/SdvSvr01.25Aug2009.tar.bz2

 

Note: The USRM software must not be running when a restore is executed. 
When using the usrmrestore script to restore a known good USRM configuration, 

you should be able to stop the USRM software, execute the usrmrestore script, and 

restart the software. 
When using the usrmrestore script to revert to a previous IP network configuration, 

you should restart the network service, or probably better still, restart the whole 

server. 
When using the usrmrestore script to install an existing USRM configuration on new 

hardware, complete the following steps: 
1  Install the USRM Redhat 5 version of the operating system, if needed. 
2  Install the USRM software version from which the backup was made. 
3  Execute the usrmrestore script. 
4  Obtain a new license file for the new hardware. 
5  Reboot the server. 
6  Start the USRM software and verify proper operation.