Cisco Model 6109 6 MHz Off-Air Reference (NTSC) Guide De Montage
USRM Web Interface - Resource Manager
78-4021139-01 Rev D
179
RFGW1
Parameters
The following table explains the ResourceManager - QAM - Configuration page
The following table explains the ResourceManager - QAM - Configuration page
parameters.
Parameter
Description
DisplayMode
Sets the web interface display mode, as follows:
Normal - Only populated entries in tables are displayed.
Config - All rows/entries of a table are displayed,
Normal - Only populated entries in tables are displayed.
Config - All rows/entries of a table are displayed,
allowing you to enter values into the displayed rows for
configuration purposes. The server implements dynamic
rows that exist if configured. The Config mode exposes
all rows of a table allowing manual data entry into the
table. This technique is used to create an entry in a table.
Other parameters not in a table may also be displayed.
ProgramNumberMin
(XDQA24 only)
The first program number used on the QAM channel.
ProgramNumberMax
(XDQA24 only)
The last program number used on the QAM channel.
ProgramNumberMult
(XDQA24 only)
The program number multiplier. The UDP port is
computed as the (program-number minus
ProgramNumberMid) times the ProgramNumberMult.