Cisco Model 6109 6 MHz Off-Air Reference (NTSC) Guide De Montage
Chapter 3 USRM Web Interface
188
78-4021139-01 Rev D
Note: This example shows the page for an RFGW1.
Parameters
The following table explains the ResourceManager - QAM - Output Ports page
The following table explains the ResourceManager - QAM - Output Ports page
parameters.
Parameter
Description
Port
The output port on the edge device.
ServiceGroupId
The identifier for the service group. When a client
registers with the server or requests a service, the client
provides the service group Id as part of the request. The
server organizes STBs by service group.
ModulationFormat
(XDQA24 and RFGW1 only)
The modulation format, QAM-64 or QAM-256 for the
xDQA. The RFGW1 adds Unknown and Other.
AdminState
The administrative state of the port, as follows:
InService - The port is in service. The normal state.
InService - The port is in service. The normal state.
OutOfService - The port is out of service.
Release - Selected to release all sessions on the port.
OutputLevel
(RFGW1 only)
(RFGW1 only)
Sets/displays the output level of the carriers on the port.
Note: The valid range is dependent on the ChannelMode
Note: The valid range is dependent on the ChannelMode
setting.
ChannelMode
(RFGW1 only)
(RFGW1 only)
Sets/displays the number of RF carriers per output port:
None, Single, Dual, Triple, or Quad.
ChannelMode2
(RFGW1 only)
(RFGW1 only)
When the RFGW1 is licensed for 96 channels, this
parameter sets/displays the number of RF carriers per
output port: None, Single, Dual, Triple, or Quad.
PortControl
(RFGW1 only)
(RFGW1 only)
Sets/displays the RF output status for the port. This
parameter is used in the SummaryStatus parameter on
the QAM Cards page.
AllocatedBandwidth (Mbps) The allocated bandwidth in Mbps.