Cisco Model 6109 6 MHz Off-Air Reference (NTSC) Guide De Montage
Chapter 3 USRM Web Interface
50
78-4021139-01 Rev D
Reset Page
This page provides a control used to reset or terminate the application software.
The following illustration shows the Reset page.
The following illustration shows the Reset page.
Parameters
The following table explains the Reset page parameters.
The following table explains the Reset page parameters.
Parameter
Description
ServerState
The current state of the server, as follows:
Active - The server software is running.
Reset - Select Reset and click Commit Changes to reset
Active - The server software is running.
Reset - Select Reset and click Commit Changes to reset
the server software. This causes the server to terminate
and restart. The Reset command depends on the
watchdog timer. The watchdog timer must be active for
the reset command to function properly. If the watchdog
is not running, selecting Reset causes the server software
to terminate.
Terminate - Select Terminate and click Commit Changes
Terminate - Select Terminate and click Commit Changes
to terminate (shut down) the server software.