Cisco DNCS System Release 2.8.1 3.8.1 4.3.1 Mode D'Emploi

Use this procedure to modify the settings for an individual set-top in your network.

In addition, you must have your network map readily available.

1.

On the DNCS Administrative Console, click the DNCS tab.

2.

Click the Home Element Provisioning tab.

3.

Click DHCT. The DHCT Provisioning window opens.

4.

In the Select Option area, click the Open option, if it is not already selected.

5.

Do you know the MAC address for the set-top you want to modify?



If yes, click the By MAC Address option, then click in the corresponding field, and type the

MAC address for the set-top you want to modify.



If no, click the By Serial Number option, then click in the corresponding field, and type the

serial number for the set-top you want to modify.

6.

Click Continue. The Set Up DHCT window opens for the set-top you selected.

7.

Make the desired changes. If you need help completing any fields, refer to the appropriate staging or

.

8.

When you finish making changes, click Save. The system saves the new set-top information in the

DNCS database.

9.

Click Close to close the Set Up DHCT window and return to the DHCT Provisioning window.

10.

Update your network map to reflect these changes.

11.

Do you need to modify another set-top?



If yes, repeat this procedure from step 4.



If no, click Cancel to close the DHCT Provisioning window and return to the DNCS

Administrative Console.

12.

Continue making any other changes that you need to make to your network.