Cisco DNCS System Release 2.8.1 3.8.1 4.3.1 Mode D'Emploi

After a QAM, MQAM, GQAM, or GoQAM modulator is saved in the DNCS database, you can modify any of its
parameters except for the headend to which it is assigned.

Note: You can use this procedure to modify any type of content QAM modulator (for example, a GoQAM or an
MQAM modulator).

Important: Contact us for assistance in changing a BFS QAM modulator.

Complete these steps to modify a QAM, MQAM, GQAM, or GoQAM modulator in the DNCS.

1.

On the DNCS Administrative Console, click the DNCS tab.

2.

Click the Network Element Provisioning tab.

3.

Click QAM. The QAM List window opens.

4.

Click once on the row containing the QAM, MQAM, GQAM, or GoQAM modulator you want to modify.

5.

Click File > Open. The Set Up QAM or Set Up MQAM window opens, as appropriate.

6.

Make the desired changes. If you need help completing any fields, refer to the following procedures as

appropriate:













Note: If you want to save your changes to the database without closing this window, you can click
Apply at any time.

7.

When you finish making changes, click Save. The system saves the new QAM or MQAM modulator

information in the DNCS database and closes the Set Up QAM or Set Up MQAM window. The QAM List
window updates to include the new modulator information.

8.

Update your network map to reflect these changes.

9.

Do you need to modify another QAM, MQAM, or GQAM modulator?



If yes, repeat this procedure from step 4.



If no, click File > Close to close the QAM List window and return to the DNCS Administrative

Console.

1.

From the DNCS Administrative Console, click the DNCS tab.

2.

Click the Network Element Provisioning tab.

3.

Click QAM. The QAM List window opens.

4.

Select the QAM, MQAM, GQAM, or GoQAM modulator that you want to reboot.