Cisco Cisco RF Gateway 10
Cisco Systems, Inc.
www.cisco.com
www.cisco.com
Release Notes for Cisco RF Gateway 10 Remote
Provisioning Utility
Provisioning Utility
First Published: March 04, 2014
OL-30283-01
This document describes the features and caveats for all releases of the Cisco RF Gateway 10 Remote
Provisioning Utility (RPU-10).
Provisioning Utility (RPU-10).
Contents
•
•
•
•
•
•
•
Introduction
The Cisco IOS-XE Release 3.3.0SQ introduces the Cisco RPU-10. Cisco RPU-10 is a Windows-based
tool to simplify the initial provisioning of multiple RF Gateway 10 units in an operator's system.
tool to simplify the initial provisioning of multiple RF Gateway 10 units in an operator's system.
Cisco RPU-10 is used for mass provisioning of the Cisco DS-48 and Cisco DS-384 line cards on
Cisco RF Gateway 10. This provisioning involves setting up a large number of configuration parameters.
The configuration parameters are listed in an Microsoft Excel sheet. Cisco RPU-10 application takes the
configuration data from Microsoft Excel sheet, generates the equivalent commands for
Cisco RF Gateway 10, and sends it to Cisco RF Gateway 10 using Telnet.
Cisco RF Gateway 10. This provisioning involves setting up a large number of configuration parameters.
The configuration parameters are listed in an Microsoft Excel sheet. Cisco RPU-10 application takes the
configuration data from Microsoft Excel sheet, generates the equivalent commands for
Cisco RF Gateway 10, and sends it to Cisco RF Gateway 10 using Telnet.