Cisco Cisco RF Gateway 10
4
ROMMON Release Notes for Cisco RF Gateway 10 With Supervisor Engine RFGW-X4516-10GE
OL-21678-03
Upgrading the Supervisor Engine ROMMON
Upgrading the Supervisor Engine ROMMON
Caution
To avoid actions that might make your system unable to boot, read this entire section before starting the
upgrade.
upgrade.
Follow this procedure to upgrade your Supervisor engine ROMMON:
Step 1
Directly connect a serial cable to the console port of the Supervisor engine.
Note
This section assumes that the console baud rate is set to 9600 (default). If you want to use a different
baud rate, change the configuration register value for your switch.
baud rate, change the configuration register value for your switch.
Step 2
Download the RFGW-10 ROMMON image, RFGW-X4516-10GE-RMUW-122_31r_SQ1, from
Cisco.com, and place it on a TFTP server in a directory that is accessible from the Supervisor that is
upgraded
Cisco.com, and place it on a TFTP server in a directory that is accessible from the Supervisor that is
upgraded
Table 1
Supported Cisco ROMMON Software Releases
ROMMON Software
Release
Release
ROMMON Image
Filename
Filename
Release Date
Supported Cisco IOS Release on
RFGW-10
RFGW-10
Cisco ROMMON
12.2(31r)SQ1
12.2(31r)SQ1
RFGW-X4516-10GE
-RMUW-122_31r_S
Q1
-RMUW-122_31r_S
Q1
December, 2010
Cisco IOS Release 12.2(44)SQ,
Cisco IOS Release 12.2(44)SQ1,
Cisco IOS Release 12.2(44)SQ2,
Cisco IOS Release 12.2(50)SQ,
Cisco IOS Release 12.2(50)SQ1
Cisco IOS Release 12.2(50)SQ2
Cisco ROMMON
12.2(31r)SQ
12.2(31r)SQ
RFGW-X4516-10GE
-RMUW-122_31r_S
Q
-RMUW-122_31r_S
Q
May, 2010
Cisco IOS Release 12.2(44)SQ,
Cisco IOS Release 12.2(44)SQ1,
Cisco IOS Release 12.2(44)SQ2,
Cisco IOS Release 12.2(50)SQ,
Cisco IOS Release 12.2(50)SQ1
Cisco ROMMON
12.2(31r)SGA1
12.2(31r)SGA1
RFGW-X4516-10GE
-RMUW-122_31r_S
GA1-LM62
-RMUW-122_31r_S
GA1-LM62
February, 2010
Cisco IOS Release 12.2(44)SQ,
Cisco IOS Release 12.2(44)SQ1,
Cisco IOS Release 12.2(44)SQ2,
Cisco IOS Release 12.2(50)SQ,
Cisco IOS Release 12.2(50)SQ1