Cisco Cisco StadiumVision Mobile Reporter Manuel De Maintenance
© 2012 Cisco Systems, Inc. All rights reserved.
Page 26 of 83
• There is no error reporting thus no way of knowing that the background was applied to a specific
phone
As an alternative, you can use a third-party application called VoIP Integration Background Deployer
for bulk background deployment. Further information on this application is documented in the
for bulk background deployment. Further information on this application is documented in the
Enabling IP Phones for Local TV Control
After the Cisco IP Phone and CUCM have been installed and are operational, to enable the Cisco IP
Phone to act as local control for a designated area (such as a luxury suite) do the following:
Phone to act as local control for a designated area (such as a luxury suite) do the following:
Step
For instructions, see
On CUCM:
• Configure Cisco StadiumVision services for the IP
• Configure Cisco StadiumVision services for the IP
Phone
• Configure any speed dials
• Configure the IP Phone display:
• Configure the IP Phone display:
-
For luxury suites, set the display of the IP Phone to
the Cisco StadiumVision Services home page
-
For administrative areas, the display should be left
as default
• Load the Cisco StadiumVision background graphic.
CUCM Configuration
On Cisco StadiumVision Director:
• Identify the CUCM server
• Configure the TabSynch User password (for
• Identify the CUCM server
• Configure the TabSynch User password (for
speeddials)
• Define the IP Phone as a control device and specify
whether it is used in a luxury suite environment (both
TV control and commerce integration services are
enabled) or in an administrative office (only TV control
services are enabled)
TV control and commerce integration services are
enabled) or in an administrative office (only TV control
services are enabled)
• Associate the DMPs with local control area (Luxury
Suite) and label the DMPs to assist in TV identification
by the user
by the user
• Associate the IP Phone with local control area (Luxury
Suite)
• Change the IP Phone background to the provided
Cisco StadiumVision graphic (or venue-specific
graphic)
graphic)
• Change the timeout values on the IP phone (optional)
Cisco StadiumVision Director
Configuration
Configuration
Enabling Third-Party Touch Panels for Local TV Control
Work with the Crestron or AMX integration partner to ensure that the touch-panel is operational
(connected to the network). If you have developed an application with the User Control API, other
considerations, such as wireless connectivity, might need to be addressed.
(connected to the network). If you have developed an application with the User Control API, other
considerations, such as wireless connectivity, might need to be addressed.