Cisco Cisco StadiumVision Mobile Streamer Manuel De Maintenance
© 2011 Cisco Systems, Inc. All rights reserved.
Page 30 of 103
Figure 25.
IR for TV Control (DMP 4305G)
IR Remote Sensor and IR Extender
If the DMP is mounted behind the TV such that the IR sensor is not visible for IR
remote control then the included IR extender may be used to extend IR control. The
IR remote is an important troubleshooting tool so it is important to ensure that all
DMPs can be IR controlled even if this is not needed during normal operation.
remote control then the included IR extender may be used to extend IR control. The
IR remote is an important troubleshooting tool so it is important to ensure that all
DMPs can be IR controlled even if this is not needed during normal operation.
DMP and TV Location
Introducing Locations
There are three object types that are used in Cisco StadiumVision Director to track
and create relationships between DMPs and their physical location. These object
types are as follows:
and create relationships between DMPs and their physical location. These object
types are as follows:
•
DMP – This object type describes a DMP with the following information.
o
Name – This is the name that describes the DMP. Typically it’s name derived
from the MAC address (e.g., Unassigned-00-0f-44-01-a5-ec) or the Location
Name.
Name.
o
Description – Optional field for additional description information
o
IP Address – DMP IP Address
o
MAC Address – DMP MAC Address
•
Location – This object type defines the physical location where the DMP is
located with the following information.
o
Name – This is the name used to identify the location and is derived from a
naming convention that an operator can easily identify where the DMP is
physically located.
physically located.
o
Description – Optional field for additional description information
o
Location ID – Optional field for additional location information. Typically this
would be where blueprint location IDs would be inserted. This information is
not always user-friendly for easy location identification.
not always user-friendly for easy location identification.
o
Display Spec – Drop-down menu for choosing the TV Type at the location
•
DMP+Location – This object type is the summation of the two above objects
when linked.