Cisco Model D9479 Gigabit QAM Modulator Guide De Montage
Provision GQAMs on the DNCS
78-745431-01 Rev E
55
10 To define the Configuration File Name, click Select. The File Selection Dialog
window opens.
11 Enter the configuration file in the Selection field and click OK. The File Selection
Dialog window closes.
12 Choose one of the following options:
To adjust the connectivity settings for an existing modulator, go to step 13.
To provision the connectivity settings for a new modulator, click Apply.
Note: When you first provision a modulator, the Connectivity tab is
Note: When you first provision a modulator, the Connectivity tab is
accessible only after you click Apply or Save.
13 Are you setting up multicast sessions?
If yes, click the Setup appropriate button and create a new Multicast Digital
Session definition. Then refer to the Digital Network Control System Online
Help for a step-by-step procedure.
If no, go to step 14.
14 Are you setting up Stat Mux Dejitter Groups?
If yes, click the appropriate Set up button and create a new stat mux dejitter
group definition. Then refer to the Digital Network Control System Online Help
for a step-by-step procedure.
If no, go to step 15.