Cisco Compact EGC Amplifier Model 93250 Fiche De Données
1
Description
The 862 MHz Compact Amplifier Platform includes a variety
of RF amplifiers that address the divergent needs of today’s
broadband networks. All Compact amplifiers are optimized for
both trunk and distribution applications and provide superior
reliability combined with a user-friendly layout. All share
common plug-in accessories. The amplifiers modular design
means that today’s upgrade will not limit tomorrow’s options.
of RF amplifiers that address the divergent needs of today’s
broadband networks. All Compact amplifiers are optimized for
both trunk and distribution applications and provide superior
reliability combined with a user-friendly layout. All share
common plug-in accessories. The amplifiers modular design
means that today’s upgrade will not limit tomorrow’s options.
Lower Your Cost of Spares
All Compact amplifiers can be configured with diplex filters,
forward interstage pads and interstage equalizer, to ensure
optimal performance. The reverse amplifier is an integral part
of all Compact amplifiers and enables a reverse bandwidth of
more than 65 MHz. All amplifiers within this series utilize the
orange plug-in 3-pin attenuator pads. These pads provide
maximum user friendliness and make it very easy to replace
the amplifier, in case of failure, as the pads are simply moved
to the new amplifier, so there is no need for manual and
complex adjustment procedures. And since all amplifiers
within this series use the same pads for both attenuation and
input tilt, operators will be able to lower their cost of spares. The extra AUX plug-in socket means that it is
possible to insert cable correctors, inverse equalizers and attenuation pads at the input. The plug-in splitters at
both input and output make it possible to configure the amplifier to the network and as such eliminate the
need for expensive external power passing passives.
forward interstage pads and interstage equalizer, to ensure
optimal performance. The reverse amplifier is an integral part
of all Compact amplifiers and enables a reverse bandwidth of
more than 65 MHz. All amplifiers within this series utilize the
orange plug-in 3-pin attenuator pads. These pads provide
maximum user friendliness and make it very easy to replace
the amplifier, in case of failure, as the pads are simply moved
to the new amplifier, so there is no need for manual and
complex adjustment procedures. And since all amplifiers
within this series use the same pads for both attenuation and
input tilt, operators will be able to lower their cost of spares. The extra AUX plug-in socket means that it is
possible to insert cable correctors, inverse equalizers and attenuation pads at the input. The plug-in splitters at
both input and output make it possible to configure the amplifier to the network and as such eliminate the
need for expensive external power passing passives.
Element Management
All amplifiers can be configured with a Scientific-Atlanta status monitoring transponder (proprietary or HMS) to
enable remove monitoring of critical amplifier parameters and remote control of the built-in 3-state reverse
switch. By switching to detection mode (-6 dB), it can be observed from which part of the network the ingress
derives. Once a failure has been located, the defective network segment may be isolated until the failure has
been eliminated and the remaining part of the reverse path is ensured normal traffic. All amplifiers are fully
integrated in Scientific Atlanta’s Element Management and Network Management Systems.
enable remove monitoring of critical amplifier parameters and remote control of the built-in 3-state reverse
switch. By switching to detection mode (-6 dB), it can be observed from which part of the network the ingress
derives. Once a failure has been located, the defective network segment may be isolated until the failure has
been eliminated and the remaining part of the reverse path is ensured normal traffic. All amplifiers are fully
integrated in Scientific Atlanta’s Element Management and Network Management Systems.
Features
GaAsFET gain block technology for improved distortion and lower noise figure
Plug-in diplex filters for easy upgrade of reverse path bandwidth
Easy plug-in mounting of transponder (no change of lid nor use of test points for cable connection)
Optional status monitoring and control
Integrated 3-state reverse switch (on/-6 dB/off) allows each reverse input to be isolated for noise and
ingress
ingress
Supports the Compact HMS transponder
Broadband Access Products
Compact Amplifier 93221