Cisco DataLINXS Rack Mount Fiber Optic Enclosures Fiche De Données

 

 

 
 
 

Prisma



 Fiber Optic Service Cables are designed to simplify 

the installation and maintenance of Prisma optical network 
products such as nodes and amplifiers.  A furcation unit 
terminates one end of each jacketed service cable with 2 mm 
color-coded sub-units that are connectorized for the particular 
Prisma module.  The opposite ends of the service cables are 
900µm pigtails suitable for splicing in splice enclosures. 
 
 
 

•  Four, six, and eight fiber options. 
•  Connectorized ends are staggered to simplify installation. 
•  Choice of 60 ft. and 100 ft. standard lengths. 
•  Color-coded fiber jackets throughout the cable for easy 

fiber identification. 

•  2 mm subunits guarantee maximum clearance inside node and amplifier housings. 
•  The pigtail end has 6 feet of outer jacket removed to save installation time. 
•  A standard 5/8-24 aluminum entry fitting is sealed with epoxy to protect against water penetration and 

provides >100 lbs of cable pull-out retention. 

•  The cable is a breakout style, core-lock design with singlemode fiber (8.3/125µm), encased in an ASTM-2 

oil-resistant, polyurethane outer jacket. 

•  All service cables are shipped with a protective sleeve over both the connectorized and pigtail ends to prevent 

handling damage and water/dust contamination. 

 

