Cisco Prisma Fiber Slack Storage Tray Fiche De Données
Description
Prisma
Fiber Optic Service Cables are designed to simplify
the installation and maintenance of Prisma optical network
products such as nodes and amplifiers. A furcation unit
terminates one end of each jacketed service cable with 2 mm
color-coded sub-units that are connectorized for the particular
Prisma module. The opposite ends of the service cables are
900µm pigtails suitable for splicing in splice enclosures.
products such as nodes and amplifiers. A furcation unit
terminates one end of each jacketed service cable with 2 mm
color-coded sub-units that are connectorized for the particular
Prisma module. The opposite ends of the service cables are
900µm pigtails suitable for splicing in splice enclosures.
Features
• Four, six, and eight fiber options.
• Connectorized ends are staggered to simplify installation.
• Choice of 60 ft. and 100 ft. standard lengths.
• Color-coded fiber jackets throughout the cable for easy
• Connectorized ends are staggered to simplify installation.
• Choice of 60 ft. and 100 ft. standard lengths.
• Color-coded fiber jackets throughout the cable for easy
fiber identification.
• 2 mm subunits guarantee maximum clearance inside node and amplifier housings.
• The pigtail end has 6 feet of outer jacket removed to save installation time.
• A standard 5/8-24 aluminum entry fitting is sealed with epoxy to protect against water penetration and
• The pigtail end has 6 feet of outer jacket removed to save installation time.
• A standard 5/8-24 aluminum entry fitting is sealed with epoxy to protect against water penetration and
provides >100 lbs of cable pull-out retention.
• The cable is a breakout style, core-lock design with singlemode fiber (8.3/125µm), encased in an ASTM-2
oil-resistant, polyurethane outer jacket.
• All service cables are shipped with a protective sleeve over both the connectorized and pigtail ends to prevent
handling damage and water/dust contamination.
Optoelectronics
Prisma
Fiber Optic Service Cables