Cisco Cisco Prisma II EDR Receiver Guide De Montage
78-715189-01 Rev C
Installation
2-1
Chapter 2
Installation
Overview
Introduction
This chapter contains instructions, site requirements, equipment, and tools needed to
install the Prisma II Headend Driver Amplifiers (HEDA).
The Prisma II Forward Headend Driver Amplifier and the Prisma II Reverse
The Prisma II Forward Headend Driver Amplifier and the Prisma II Reverse
Headend Driver Amplifier are separate modules with different part numbers.
However, with the exception of their application and a few important signal
adjustments, they are installed and function in almost exactly the same manner and
are refered to as one module for the purposes of this guide.
Qualified Personnel
WARNING:
Allow only qualified personnel to install, operate, maintain, or service this
product. Otherwise, personal injury or equipment damage may occur.
In This Chapter
This chapter gives step-by-step instructions on installing the Prisma II HEDA.
Topic
See Page
Preparing for Installation
2-2
Site Requirements
2-3
Connecting the RF Cables to the Chassis
2-6
Installing the Module in the Chassis
2-7