Cisco Cisco Prisma II EDR Receiver Guide De Montage
3-24
Operation Using the ICIM
78-748705-01 Rev C
Configure the Processor Using the ICIM,
Continued
Configuring Parameters
Using the ICIM, you can configure the parameters listed in the previous table.
Follow these steps to configure the parameters.
Follow these steps to configure the parameters.
1.
From the MAIN menu, press the
key to highlight the Shelf and Slot
fields.
2.
Press the
SEL
key to address the Shelf number. Then press the
key or
the
key to scroll to the number of the desired shelf.
3.
Press the
ENTER
key.
Result: The Slot field is highlighted.
4.
Press the
key or the
keys to scroll to the number of the desired
slot.
5.
Press the
ENTER
key.
Result: The initial information for the module of interest displays on the
ICIM menu.
6.
To configure the module, press the
CFG
key.
7.
Press the
key or the
key to scroll through the configurable controls
until you find the parameter of interest.
8.
Press the
SEL
key to select the highlighted control.
9.
Press the
key or the
key to activate or change the value of the
selected control.
10. Press the
ENTER
key to save the changes and return to the MAIN menu.