Cisco Cisco Prime Network Services Controller 3.0
© 2013, 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 121 of 169
Setting the Description
You can set the description.
BEFORE YOU BEGIN
Services Controller CLI.
CLI
Policy Manager
SUMMARY STEPS
1. connect policy-mgr
2. scope org
3. scope policy
4. scope corefile <policy-name>
5. set descr <description>
6. commit-buffer
DETAILED STEPS
Command
Purpose
Step 1 connect policy-mgr
Example:
nsc# connect policy-mgr
Places you in the policy manager
CLI.
CLI.
Step 2 scope org
Example:
nsc(policy-mgr)# scope org
Places you in organization mode.
Step 3 scope policy
Example:
nsc(policy-mgr) /org # scope policy
Places you in policy mode.
Step 4 scope corefile
Example:
nsc(policy-mgr) /org/policy # scope corefile
EaCorePA10
Places you in core file mode.
Step 5 set descr
Example:
nsc(policy-mgr) /org/policy/corefile # set
descr CoreFilePolicyAgent10
Sets the description.
Step 6 commit-buffer
Example:
nsc /system/backup* # commit-buffer
Commits (saves) the
configuration.
configuration.
EXAMPLES
This example shows how to add a description to the core policy EaCorePA10:
nsc# connect policy-mgr
Cisco Prime Network Services Controller
TAC support: http://www.cisco.com/tac