Cisco Cisco Prime Network Services Controller 3.0
© 2013, 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 162 of 169
nsc(policy-mgr) /org/policy/syslog # create remote-destination server-1 test
nsc(policy-mgr) /org/policy/syslog* # commit-buffer
nsc(policy-mgr) /org/policy/syslog #
Enabling Remote Destinations
You can enable remote destinations.
BEFORE YOU BEGIN
Services Controller CLI.
CLI
Policy Manager
SUMMARY STEPS
1. connect policy-mgr
2. scope org
3. scope policy
4. scope syslog <policy-name>
5. enable remote-destination {server-1 | server-2 | server-3}
6. commit-buffer
DETAILED STEPS
Command
Purpose
Step 1 connect policy-mgr
Example:
nsc# connect policy-mgr
Places you in the policy manager
CLI.
CLI.
Step 2 scope org
Example:
nsc(policy-mgr)# scope org
Places you in organization mode.
Step 3 scope policy
Example:
nsc(policy-mgr) /org # scope policy
Places you in policy mode.
Step 4 scope syslog
Example:
nsc(policy-mgr) /org/policy # scope log
EaLogPA11
Places you in log mode.
Step 5 enable
Example:
nsc(policy-mgr) /org/policy/syslog # enable
remote-destination server-1
Enables a remote destination.
Step 6 commit-buffer
Example:
nsc /system/backup* # commit-buffer
Commits (saves) the
configuration.
configuration.