Cisco Cisco Prime Network Services Controller 3.0
© 2013, 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 165 of 169
Setting Remote Destinations
You can set remote destinations.
BEFORE YOU BEGIN
Services Controller CLI.
CLI
Policy Manager
SUMMARY STEPS
1. connect policy-mgr
2. scope org
3. scope policy
4. scope syslog <policy-name>
5. set remote-destination {server-1 | server-2 | server-3} {facility {auth | authpriv | cron | daemon | ftp |
kernel | local0 | local1 | local2 | local3 | local4 | local5 | local6 | local7 | lpr | mail | news | syslog |
user | uucp} | hostname <host-name> | | level {alerts | critical | debugging | emergencies | errors |
information | notifications | warnings}}
user | uucp} | hostname <host-name> | | level {alerts | critical | debugging | emergencies | errors |
information | notifications | warnings}}
Note After you enter the command set remote-destination {server-1 | server-2 | server-3} you can
enter facility or hostname or level. You can provide one or more options (that is facility, hostname, and
level) in the same command, and the options can be in any order.
enter facility or hostname or level. You can provide one or more options (that is facility, hostname, and
level) in the same command, and the options can be in any order.
6. commit-buffer
DETAILED STEPS
Command
Purpose
Step 1 connect policy-mgr
Example:
nsc# connect policy-mgr
Places you in the policy manager
CLI.
CLI.
Step 2 scope org
Example:
nsc(policy-mgr)# scope org
Places you in organization mode.
Step 3 scope policy
Example:
nsc(policy-mgr) /org # scope policy
Places you in policy mode.
Step 4 scope syslog
Example:
nsc(policy-mgr) /org/policy # scope log
EaLogPA11
Places you in log mode.
Step 5 set remote-destination
Example:
nsc(policy-mgr) /org/policy/syslog # set
remote-destination server-2 level critical
Sets a remote destination.
Step 6 commit-buffer
Example:
nsc /system/backup* # commit-buffer
Commits (saves) the
configuration.
configuration.