Cisco Cisco Prime Network Services Controller 3.0
© 2013, 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 24 of 169
Managing Security
BEFORE YOU BEGIN
See
Services Controller CLI.
CLI
Local management
SUMMARY STEPS
1. connect local-mgmt
2. modify shared-secret
DETAILED STEPS
Command
Purpose
Step 1 connect local-mgmt
Example:
nsc# connect local-mgmt
Places you in the local management
CLI.
CLI.
Step 2
modify shared-secret
Example:
nsc(local-mgmt)# modify shared-secret
Changes the shared secret password.
The password must be a minimum of
8 characters.
8 characters.
EXAMPLES
This example shows how to modify the shared secret password
:
nsc# connect local-mgmt
Cisco Prime Network Services Controller
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2013, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://www.opensource.org/licenses/lgpl-2.1.php
nsc(local-mgmt)# modify shared-secret
Enter the Shared Secret :
Confirm Shared Secret :
nsc(local-mgmt)#