Cisco Cisco Prime Network Services Controller 3.0
© 2013, 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 34 of 169
Virtual machine manager
SUMMARY STEPS
1. (Optional)
connect {policy-mgr | resource-mgr | service-reg | vm-mgr}
Note Step 1 is optional. You can also perform the show configuration command in the management
controller CLI. Each CLI returns different configuration information, depending on the CLI you logged into.
2. show configuration
DETAILED STEPS
Command
Purpose
Step 1 show configuration
Example:
nsc# show configuration
Displays configuration information.
EXAMPLES
This example shows how to display the configuration information of the management controller:
nsc# show configuration
scope system
set hostname pnsc
exit
scope network-interface mgmt
set net ip 172.20.28.151 netmask 255.255.255.224 gw 172.20.28.129
exit
nsc#
Displaying the Network Interface
You can display the network interface.
BEFORE YOU BEGIN
See
Services Controller CLI.
CLI
Management controller
SUMMARY STEPS
1. show network-interface [detail | fsm status | mgmt]
DETAILED STEPS
Command
Purpose
Step 1 show network-interface
Example:
nsc# show network-interface mgmt
Displays the network interface.