Cisco Cisco Interactive Experience Client 4650 Guide De Montage

-8

Cisco Interactive Experience Client 4650 Quick Start Guide

Getting Started

Step 1

Locate a vertical surface near the video display where you want the Cisco IEC 4650 to be mounted.

Step 2

Attach the mounting plate to the video display, wall, or kiosk

Mount the plate so that the up arrow points

upwards and is visible.

Note

If mounting to sheet rock or other porous surface, use appropriate mounting hardware (not supplied).

Step 3

Carefully slide the Cisco IEC 4650 onto the tabs. The display and network connections will be facing
the floor.

Connecting and Powering Up

The back of the Cisco IEC 4650 contains multiple ports that will be used to connect to the video display,
keyboard, mouse, network, and electrical outlet. Follow the steps below to connect the equipment and
power on the device.

Step 1

Connect an USB keyboard to one of the USB ports on the Cisco IEC 4650.

Tip

It is recommended that you use a wired keyboard as opposed to a wireless keyboard. With some wireless
keyboards, the IEC detects it as a second touchscreen instead of a keyboard.

Step 2

Connect an USB cable or wireless USB adapter for a mouse to an USB port on the Cisco IEC 4650.

Step 3

(Optional) Connect an USB cable for a webcam to an USB port on the Cisco IEC 4650.

Step 4

(Optional) Connect other peripherals such as speakers, microphone, magnetic card reader, barcode
scanner, printer, etc.

Note

If using the RS232 port for a RCA, TRS, or TRRS connector, the tip of the connector
corresponds to pin 2 and the ring of the connector corresponds to pin 3 on a DB-9 connector.

Step 5

Connect the video display cable to either the HDMI port or Mini DisplayPort on the Cisco IEC 4650.
Then connect the other end of the cable to the video display.

Tip

To optimize the video quality, the Cisco IEC 4650 should be connected to a 1080p or 4K LED
or LCD video display using the HDMI or Mini DisplayPort cable.

Step 6

If the display is a touch screen, connect an USB cable to it and an USB interface on the Cisco IEC 4650.

Step 7

Plug the power cord for the video display into an electrical outlet.

Step 8

Turn on the power to the video display.

Step 9

Connect an Ethernet cable to the LAN port on the Cisco IEC 4650. Connect the other end of the Ethernet
cable to an Ethernet wall jack or Ethernet port on a router or switch.

Step 10

Connect the power adapter to the DC 12V in connector on the Cisco IEC 4650.

Step 11

Plug the power adapter into an electrical outlet.