Cisco Cisco IP Contact Center Release 4.6.1 Références techniques
54
Eicon Card Configuration
54
Note:
If the WAN Services parameters are changed, the WAN Services must be
restarted for the changes to take effect. The following commands are used
to restart the WAN Services:
restarted for the changes to take effect. The following commands are used
to restart the WAN Services:
Eccard stop
Eccard start.
The ECMODULE TRACE function can be a useful tool for the X.25 data
communications analysis. Here are some examples of ECMODULE
TRACE with different command line parameters:
communications analysis. Here are some examples of ECMODULE
TRACE with different command line parameters:
Displays trace information on the X.25 protocol on port #1:
ECMODULE TRACE X25 /P 1
Displays trace information on the HDLC protocol on port #1:
ECMODULE TRACE HDLC /P 1
Enable the X25 trace option on port #1, with a trace buffer size of 4096
bytes:
bytes:
ECMODULE TRACE X25 /P 1 /S 4096
Clears and resets the X25 trace buffer on port #1:
ECMODULE TRACE X25 /P 1 /S 0