Cisco Cisco Content Security Management Appliance M1070 Mode D'Emploi
14-2
AsyncOS 8.3.5 for Cisco Content Security Management User Guide
Chapter 14 Common Administrative Tasks
Working with Feature Keys
Working with Feature Keys
Keys are specific to the serial number of your appliance and specific to the feature that you enable. You
cannot reuse a key from one system on another system.
cannot reuse a key from one system on another system.
To perform the tasks described in this section from the command-line prompt, use the
featurekey
command.
Performing Maintenance Tasks Using CLI Commands
The operations and commands described in this section enable you to perform maintenance-related tasks
on the Security Management appliance. This section describes the following operations and commands:
on the Security Management appliance. This section describes the following operations and commands:
•
shutdown
•
reboot
•
suspend
•
offline
•
resume
•
resetconfig
•
version
Shutting Down the Security Management Appliance
To shut down your Security Management appliance, use the Management Appliance > System
Administration > Shutdown/Reboot page, or use the shutdown command at the command-line
prompt.
Administration > Shutdown/Reboot page, or use the shutdown command at the command-line
prompt.
To
Do This
•
View all active feature keys for the appliance
•
View any feature keys that are pending
activation
activation
•
Search for new keys that have been issued
•
Install feature keys manually
•
Activate feature keys
Select Management Appliance > System
Administration > Feature Keys.
Administration > Feature Keys.
To add a new feature key manually, paste or enter
the key into the Feature Key field and click
Submit Key. An error message appears if the
feature is not added (for example, if the key is
incorrect); otherwise, the feature key is added to
the list.
the key into the Feature Key field and click
Submit Key. An error message appears if the
feature is not added (for example, if the key is
incorrect); otherwise, the feature key is added to
the list.
If the appliance is configured to automatically
download and install new keys as they are issued.
the Pending Activation list is always empty.
download and install new keys as they are issued.
the Pending Activation list is always empty.
Enable or disable automatic download and
activation of feature keys
activation of feature keys
Select Management Appliance > System
Administration > Feature Key Settings
Administration > Feature Key Settings
By default, the appliance periodically checks for
new keys.
new keys.
Renew expired feature keys
Contact your Cisco representative