Cisco Cisco Content Security Management Appliance M1070 Mode D'Emploi
A-3
AsyncOS 9.5.x for Cisco Content Security Management Appliances User Guide
Appendix A IP Interfaces and Accessing the Appliance
IP Interfaces
Step 9
If you are using the spam quarantine, you can select HTTP or HTTPS or both and specify the port
numbers for each. You can also select whether to redirect HTTP requests to HTTPS. Finally, you can
specify whether the IP interface is the default interface for the spam quarantine, and whether to use the
hostname as the URL or provide a custom URL.
numbers for each. You can also select whether to redirect HTTP requests to HTTPS. Finally, you can
specify whether the IP interface is the default interface for the spam quarantine, and whether to use the
hostname as the URL or provide a custom URL.
Step 10
Submit and commit your changes.
Accessing the Appliance via FTP
Caution
By disabling services via the Management Appliance > Network > IP Interfaces page or the
interfaceconfig
command, you can disconnect yourself from the GUI or CLI, depending on how you
are connected to the appliance. Do not disable services with this command if you are not able to
reconnect to the appliance using another protocol, the Serial interface, or the default settings on the
Management port.
reconnect to the appliance using another protocol, the Serial interface, or the default settings on the
Management port.
Procedure
Step 1
Use the Management Appliance > Network > IP Interfaces page (or the
interfaceconfig
command) to
enable FTP access for the interface.
Note
Remember to commit your changes before moving on to the next step.
Step 2
Access the interface via FTP. Ensure you are using the correct IP address for the interface.
Example:
ftp 192.168.42.42
Many browsers also allow you to access interfaces via FTP.
Example:
ftp://192.10.10.10