Cisco Cisco Administrative Workstation
2-19
ICM-to-ICM Gateway User Guide for Cisco ICM Enterprise & Hosted Editions Release 7.1(1)
ICM-to-ICM Gateway Configuration
Server Configuration
Note
Make a note of the Physical Controller ID value. You need this value
to set up the INCRP NIC on the CallRouter. If the NIC is duplexed,
you need both Physical Controller ID values.
to set up the INCRP NIC on the CallRouter. If the NIC is duplexed,
you need both Physical Controller ID values.
Step 12
Click Close to exit the NIC Explorer.
Configuring the INCRP NIC in ICM Setup
To configure the INCRP NIC on the Server ICM, run ICM Setup and edit the Router
from the Server Router machine (rather than from the installation CD).
from the Server Router machine (rather than from the installation CD).
Note
For more information on router installation, refer to the ICM Installation Guide
for Cisco ICM/IPCC Enterprise & Hosted Editions.
for Cisco ICM/IPCC Enterprise & Hosted Editions.
Perform the following steps.
Step 1
On the Router Component Properties screen, click the INCRP check box. The
Configure button becomes enabled.
Configure button becomes enabled.
Step 2
Click Configure. The INCRP NIC Properties screen appears.