Cisco Cisco SG200-26P 26-port Gigabit PoE Smart Switch
10
Release Notes for 200, 300, 500, and ESW2 Series Switches Firmware Version 1.3.5.x
Release Notes
•
Modified VLAN ACL such that an ACL can now be attached to a VLAN, and
not only to port/LAG for Sx300 and Sx500.
not only to port/LAG for Sx300 and Sx500.
•
Updated Show system so that the system type (e.g. SG500X-24P) is added
to the System Description field in the output of this CLI command for Sx300
and Sx500.
to the System Description field in the output of this CLI command for Sx300
and Sx500.
•
Updated LLDP so that the sysName TLV is sent by default. Chassis ID can
be either MAC Address (as in previous releases) or Hostname.
be either MAC Address (as in previous releases) or Hostname.
Defects Corrected
•
In web GUI “Security->Arp Inspection->Properties”, the “DHCP Snooping
Binding database” hyperlink is invalid. (CQ147363)
Binding database” hyperlink is invalid. (CQ147363)
•
When the firmware is downgraded from 1.3.0.62 to 1.2.9.44, the IP static
routes are lost. (CQ147578)
routes are lost. (CQ147578)
•
When the value of the SA or DA is changed from a valid MAC to any other
value in the webpage, the SA or DA becomes 0000.0000.0000 in CLI.
(CQ147665)
value in the webpage, the SA or DA becomes 0000.0000.0000 in CLI.
(CQ147665)
•
In web GUI “Security->IP Source Guard->Properties”, the “DHCP Snooping”
hyperlink is invalid. (CQ147666)
hyperlink is invalid. (CQ147666)
•
In web GUI “Security->IP Source Guard->Interface”, the “DHCP Snooping”
and “DHCP Snooping untrusted interfaces” hyperlinks are invalid.
(CQ147667)
and “DHCP Snooping untrusted interfaces” hyperlinks are invalid.
(CQ147667)
•
When a DVA authorized port tries to re-authenticate and RADIUS attributes
no longer include VLAN attributes, reauthentication should fail and the port
should become unauthorized. This is not happening, and the port does not
fail. (CQ131469)
no longer include VLAN attributes, reauthentication should fail and the port
should become unauthorized. This is not happening, and the port does not
fail. (CQ131469)
•
You cannot configure IP address 192.168.1.0/24 subnet as an address pool,
other subnets are allowed. (CQ145102)
other subnets are allowed. (CQ145102)
•
The show environment command on a stack shows a temperature of 0
for all units if the switch without a sensor is the master in the stack.
(CQ145525, CQ145542)
for all units if the switch without a sensor is the master in the stack.
(CQ145525, CQ145542)
•
When the current master unit is already set to auto-numbering,
reconfiguring it as 'auto' does not work. (CQ142567)
reconfiguring it as 'auto' does not work. (CQ142567)
•
You cannot run ping or traceroute by using a Domain Name on the web-
based interface. (CQ143759)
based interface. (CQ143759)