Manualsbrain.com
  1. Manuels
  2. Marques
  3. Cisco
  4. Cisco SG200-26P 26-port Gigabit PoE Smart Switch
  5. Références techniques

Cisco Cisco SG200-26P 26-port Gigabit PoE Smart Switch Références techniques

Télécharger
Page de 428
Security
RADIUS
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
327
8
UDP
5353
Active
TCP
80
Listen
HTTP
UDP
0
Active
TCP
23
Listen
Telnet
TCP
23
Established 10.12.17.82:2692
Telnet
UDP
546
Active
TCP
0
Disabled
SSH
RADIUS
This section describes how to configure RADIUS client functionality and RADIUS 
servers on the switch. RADIUS functionality is primarily used for switch 
management access authentication and IEEE 802.1X (“dot1X”) port access control.
radius server attribute nas-ip-addr
Use this command to configure the RADIUS client to include the NAS-IP Address 
attribute in the RADIUS requests. If a specific IP address is entered, then the 
RADIUS client uses that IP address in the NAS-IP-Address attribute in RADIUS 
communication. If the IP address is not specified, the RADIUS client does not send 
any value for this attribute. 
Use the 
no form of the command to disable this attribute. The no form functions 
the same whether or not an IP address is specified in the command.
radius server attribute nas-ip-addr[ip-address
]
no radius server attribute nas-ip-addr[ip-address
]
Syntax Descriptions
Command Modes
Global Config
Parameter
Description
ip-address
The IP address to use in the NAS-IP-Address attribute in 
RADIUS communication. If the command is entered with 
no specific IP address, the RADIUS client does not send 
include any value for the NAS-IP-Address attribute.