IC Intracom Pan/Tilt Network Camera 550857 Manuel D’Utilisation

 

  

The INTELLINET NETWORK SOLUTIONS SOHO Network Camera, Model NSC18-WN, is the ideal camera
for home-network-based video streaming. You can access the camera remotely over the Internet, and you
can save snapshots or record directly from your Web browser to the local hard drive without installing any
software or drivers.

The NSC18-WN Pan/Tilt Network Camera is equipped with a 1.3 Megapixel image sensor that generates crystal-clear images in resolutions of up to 1024 x
768 pixels, providing a much more detailed video. Thanks to the use of progressive-scan technology, jagged lines caused by regular interlacing image
sensors (flickering effect on moving objects) have been all but eliminated.

The NSC18-WN Pan/Tilt Network Camera features a motorized Pan and Tilt control with a viewing angle of 355° horizontally and 120° vertically. The user
can view and control the camera remotely via a Web browser or the included 16-channel viewing and recording utility, and is no longer limited by the static
viewing angle of fixed network cameras. The Pan/Tilt Network Camera lets the user decide which area to monitor at any given time.

The NSC18-WN Pan/Tilt Network Camera can store up to 8 GB of images and video on standard SD/SDHC cards. The camera can save JPEG images or
video clips on the internal storage, providing a most important backup solution in case the network is down, and, should the SD card get filled up, the
camera even notifies you via e-mail about the impending low storage space situation. Access to the recorded date does not require any special software;
simply browse through the recordings with your Web browser and view them with your favorite media player. And if you'd rather take the SD card out of the
camera and read it with your SD card reader-equipped notebook or desktop PC to store the recordings permanently, you can do that, too!

No need to worry about complex network setup procedures. The installation wizard provides an easy setup that allows a non-technical person to begin using
the camera right away.

Includes a Multi-Viewer software utility that allows you to monitor up to 16 cameras at the same time. The advanced video compression produces a
high-quality, high-frame-rate video stream in megapixel resolution.

The Pro Series Network Camera supports MPEG4 as well as Motion-JPEG video formats, providing superior quality and, at the same time, continuing to
support existing applications. MPEG4, on the other hand, allows you to transmit a larger amount of data over the same amount of bandwidth while providing
smooth and seamless viewing. And if you wish to view the live video in a video player rather than the Web browser, you can do that, too, with the freely
available VLC player.

Go wireless or wired. The camera supports WEP, WPA and WPA2 encryption for wireless security, and you can connect higher-gain antennas to extend the
wireless transmission range. The new Wireless N standard has dramatically increased the overall performance of a wireless network. With speeds up to 300
Mbps and WPS technology that connects the network camera to your wireless network with the push of a button, the new Wireless N technology greatly
surpasses Wireless G technology in every aspect possible. On case you have not upgraded your wireless network to the N standard yet, there is no need to
worry, as the NSC18-WN Pan/Tilt Network Camera offers legacy support for existing Wireless G networks.

Utilize the free DYNDNS service (like DYNDNS.org) in order to connect to your camera, even if you do not have a static IP address assigned by your ISP
(Internet service provider). This feature lets you easily set up a URL that can be used to access the camera through the Internet using any Web browser.