Brother CS7130 Mode D’Emploi
KNOWING YOUR SEWING MACHINE
18
■
Using the needle threader (for models
equipped with the needle threader)
CAUTION
• The needle threader can be used with a 75/11
through 100/16 home sewing machine needle.
However, the needle threader cannot be used
with a 65/9 home sewing machine needle.
When using special thread such as transparent
nylon thread or metallic thread, the needle
threader cannot be used.
• Thread with a thickness of 130/120 or thicker
cannot be used with the needle threader.
• The needle threader cannot be used with the
wing needle or the twin needle.
• If the needle threader cannot be used, refer to
“Upper threading” (page 15).
1
Follow steps
1
through
10
of the procedure
in “Upper threading”.
2
Lower the presser foot lever.
3
While lowering the needle threader lever,
hook the thread onto the guide.
hook the thread onto the guide.
1
Needle holder
2
Needle threader
lever
3
Guide
4
Fully lower the needle threader lever.
X
The hook passes through the eye of the
needle, and catch the thread.
needle, and catch the thread.
1
Hook
2
Thread
5
Release the needle threader lever. Then pull
the loop of the thread.
the loop of the thread.
1
Loop of thread
CAUTION
• Be careful not to pull on the thread with force
or it may bend the needle.
• If the thread does not pass through the eye of
the needle, start from step
3
again.
6
Raise the presser foot lever.
1
Presser foot
lever
7
Pass the end of the thread as illustrated
bellow.
bellow.
1
5 cm (2 inches)
Note
• If you incorrectly feed the thread you may cause
sewing problems.
Drawing up the lower thread
1
Lightly hold the end of the upper thread.
1
Upper thread
2
While holding the end of the upper thread,
raise the needle in the following way.
raise the needle in the following way.