Brother PE-DESIGN NEXT Manuel D'Instructions
176
Transferring Embroidery Designs to Machines
Transferring directly to a
machine’s memory
machine’s memory
Designs can be transferred to
embroidery machines that can
be connected to a computer
using a USB cable.
embroidery machines that can
be connected to a computer
using a USB cable.
1.
Connect the embroidery machine to the
computer.
computer.
2.
Click 1, then 2, then 3, then 4.
Data transfer begins.
3.
After the data has been transferred, the
message “Finished outputting data.” appears,
indicating that the transfer is finished. Click
OK.
message “Finished outputting data.” appears,
indicating that the transfer is finished. Click
OK.
a
Note:
If there is already a file with the same name
at the destination, the following dialog box
appears. Select whether to overwrite the
existing file, to stop copying or to copy the
file using a different name.
at the destination, the following dialog box
appears. Select whether to overwrite the
existing file, to stop copying or to copy the
file using a different name.
3
1
2
4
b
Memo:
• For details on transferring designs with this
method, refer to the Operation Manual
provided with your embroidery machine.
provided with your embroidery machine.
• If multiple machines are connected, specify
where the data is to be transferred in the
area shown below.
area shown below.
• If the connected embroidery machine has
been set to Link mode, the command Send
to Your Machine, mentioned in this
procedure, cannot be selected. To select
this command, return the machine to
normal mode.
to Your Machine, mentioned in this
procedure, cannot be selected. To select
this command, return the machine to
normal mode.
XE8656-001.book Page 176 Monday, May 24, 2010 5:44 PM