Brother PE-DESIGN NEXT Manuel D'Instructions
29
Ge
tt
tt
ing St
art
e
e
d
Tutorial 1: Getting Started
Click 1, then 2, then 3.
Click OK.
When the writing is finished, the following
message appears. Click OK.
message appears. Click OK.
c
“Transferring to a machine by using an
original card” on page 174
For details on saving embroidery
patterns, refer to “Saving” on page 81.
original card” on page 174
For details on saving embroidery
patterns, refer to “Saving” on page 81.
■
Transferring data to embroidery
machines via a USB media
machines via a USB media
Plug the USB media into the computer.
Click 1, then 2, then 3, then 4.
Data transfer begins.
When the transferring is finished, the following
message appears. Click OK.
message appears. Click OK.
After an embroidery pattern is transferred,
remove the USB media from the computer.
remove the USB media from the computer.
Insert the USB media into the USB port on the
machine.
machine.
a
Note:
• When writing to an original card that
already contains data, all data on the card
will be deleted.
will be deleted.
• Before using an original card, check that
the designs on the card are no longer
needed.
needed.
• If you wish to keep the designs, store them
on a hard disk or other storage media.
c
“From an embroidery card” on
page 79
page 79
b
Memo:
• Stitch data is compressed to fit on an
original card.
• Depending on the compression method, the
size of the data may change.
2
1
2
3
3
4
a
Note:
Precautions for using the card writer
module/original cards
• The original card is inserted correctly
module/original cards
• The original card is inserted correctly
when you hear it snap into place.
• Never remove an original card or unplug
the USB cable while the LED indicator is
flashing.
flashing.
b
Memo:
For details on using the embroidery machine,
refer to the Operation Manual included with it.
refer to the Operation Manual included with it.
1
2
1
2
2
4
3
3
4
5
XE8656-001.book Page 29 Monday, May 24, 2010 5:44 PM