Brother PE-DESIGN NEXT Manuel D'Instructions
87
Specifying the Design Page Size and Color
B
a
s
ic
Lay
out &
Edit
ing
Ope
rat
ions
Optimize hoop change
This setting can be selected if a multi-position hoop
(100 × 172 mm or 130 × 300 mm) has been selected
as the Design Page size.
(100 × 172 mm or 130 × 300 mm) has been selected
as the Design Page size.
Select the check box to optimize the sewing order/
order of hoop position changes so that the number
of times that the hoop position is changed is
reduced to the minimum.
order of hoop position changes so that the number
of times that the hoop position is changed is
reduced to the minimum.
This reduces the risk of misalignment in the
embroidery pattern or uneven stitching from
changing the hoop position too often.
embroidery pattern or uneven stitching from
changing the hoop position too often.
Jump Stitch Trimming
These settings are applied only when embroidering
with our multi-needle embroidery machines. Before
with our multi-needle embroidery machines. Before
these settings can be specified, select
under Machine Type in the Design Setting dialog
box.
box.
Specify the minimum jump stitch length for thread
trimming.
trimming.
a
Note:
This setting cannot be selected if a Jumbo
Frame, multi-position hoop or Custom Size
has been selected as the Design Page size.
Frame, multi-position hoop or Custom Size
has been selected as the Design Page size.
Design Page (on your screen)
Sewing area = Design Page area
Sewing area = Use existing design area
a
Note:
These settings are not applied with any other
embroidery machine. For details, refer to the
Operation Manual provided with your
machine.
embroidery machine. For details, refer to the
Operation Manual provided with your
machine.
XE8656-001.book Page 87 Monday, May 24, 2010 5:44 PM