Samsung RS12SL Guide D’Installation Rapide
Using the control panel
3.
Operating the SAMSUNG side-by-side refrigerator
1
4
5
6
8
9
10
2
3
7
Touch this button for better energy efficiency. The Energy Saver icon lights up when you Touch this button.
The Energy Saver function is automatically set to “ON” when power is supplied to the refrigerator.
If condensation or water drops appear on the doors, turn the Energy Saver mode off.
The Energy Saver function is automatically set to “ON” when power is supplied to the refrigerator.
If condensation or water drops appear on the doors, turn the Energy Saver mode off.
(
1
) Energy Saver
Touch this button to set the Freezer to your desired temperature. You can set the temperature between 8°F and -8°F.
Touch and hold this button for 3 seconds, to speed up the time needed to freeze products in the Freezer.
It can be helpful if you need to quickly freeze easily spoiled items or if the temperature in the Freezer has warmed dramatically
(For example, if the door was left open).
Touch and hold this button for 3 seconds, to speed up the time needed to freeze products in the Freezer.
It can be helpful if you need to quickly freeze easily spoiled items or if the temperature in the Freezer has warmed dramatically
(For example, if the door was left open).
(
2
) Freezer (hold 3 sec for
Power Freeze)
This button serves two purposes:
1) To turn the door open alarm on and off. If the door alarm is set to On, an alarm beeps if any refrigerator door is left open for
1) To turn the door open alarm on and off. If the door alarm is set to On, an alarm beeps if any refrigerator door is left open for
more than three minutes. The beeping stops when you close the door. The door alarm function is pre-set to On in the factory.
You can turn it off by touching and then releasing this button. You can turn it back on in the same fashion.
You can turn it off by touching and then releasing this button. You can turn it back on in the same fashion.
The icon lights up when the function is on.
2) After you replace the water filter, Touch and hold this button 3 sec to reset the water filter life indicator.
2) After you replace the water filter, Touch and hold this button 3 sec to reset the water filter life indicator.
(
3
) Alarm / hold 3 sec for
Filter Reset
Touching this button turns on the Dispenser LED lamp (under the display) in continuous mode so that it stays on continuously.
The button also lights up. If you want the Dispenser lamp to come on only when some one uses the dispenser,
press the Lighting button to turn the continuous mode off. Touch and hold this button for 3 seconds to switch the temperature
units between °C and °F
The button also lights up. If you want the Dispenser lamp to come on only when some one uses the dispenser,
press the Lighting button to turn the continuous mode off. Touch and hold this button for 3 seconds to switch the temperature
units between °C and °F
(
4
) Lighting/ hold 3 sec for
C
↔
F
Touch this button to set the fridge to your desired temperature. You can set the temperature between 34°F and 46°F.
Touch and hold the this button for 3 seconds, to speed up the time needed to cool products in the Refrigerator. It can be helpful
if you need to quickly cool easily spoiled items or if the temperature in the fridge has warmed dramatically (For example, if the
door was left open).
Touch and hold the this button for 3 seconds, to speed up the time needed to cool products in the Refrigerator. It can be helpful
if you need to quickly cool easily spoiled items or if the temperature in the fridge has warmed dramatically (For example, if the
door was left open).
(
5
) Fridge (hold 3 sec for
Power Cool)
If you don’t want to make more ice, Touch this button. Touching this button 3 second locks the display panel and dispenser
buttons so the buttons can not be used. The Child Lock icon lights up to indicate you’ve activated the Child Lock function.
buttons so the buttons can not be used. The Child Lock icon lights up to indicate you’ve activated the Child Lock function.
(
6
) Ice Off (hold 3 sec for
child lock)
Touch this button to select your desired ice type. Cubed and crushed ice modes will be alternatively Ice Type changed whenever
you press the button. This mode can not be used with the Water mode simultaneously.
you press the button. This mode can not be used with the Water mode simultaneously.
(
7
) Ice Type
Touch this button to dispense water. This mode can not be used with the Ice Type mode simultaneously.
Water mode will be off if you Touch the Ice Type button.
Water mode will be off if you Touch the Ice Type button.
(
8
) Water
QS Guide-POLARIS-EN(이란향).indd 5
2011.3.19 11:8:25 AM