Samsung RF67DERS Manuel D’Utilisation

 

setting up

 

setting up

REASSEMblING ThE FREEzER dOOR (dRAWER TYpE)

1.  Pull out the rails to the full 

length on each sidle of the 
cabinet evenly.

2.  Hang the freezer door 

front onto open slot on the 
sides.

3.  With the 10mm wrench,  

reattach 4 bolts to connect 
the rail with the door.

4.  Replace the drawer box.

REASSEMblING ThE FREEzER dOOR (SWING TYpE)

1.  Place the hole in the 

bottom of the freezer door 
over the right side low 
hinge.

2.  Replace the middle hinge connected to the freezer.

3.  Insert and tighten the screw into the left and right middle 

hinges with a philips screwdriver(+). Insert and tighten the 2 
hex head bolts into the left and right middle hinges with an 
allen wrench(Ø5mm).

4.  Replace the cap on the middle hinge.

Slot

DA68-01868P.indb   18

2010.6.29   2:30:20 PM