Samsung RF67DERS Manuel D’Utilisation
32_
operating
32_
operating
REMOvING ThE FREEzER AccESSORIES
1. Pull Out Drawer
To remove - Pull the drawer out to full extension.
Tilt up rear of drawer and lift straight
out.
(Refer to picture 1 & 2)
out.
(Refer to picture 1 & 2)
Open the freezer door fully and remove the drawer.
To replace - Place the drawer onto the rails by tilting
it up. Lower the drawer into place until it
is horizontal and slide the drawer in.
(Refer to picture 3)
is horizontal and slide the drawer in.
(Refer to picture 3)
2. Freezer Drawer Bin
Swing-Type
To remove - Pull the drawer out fully. Tilt up the rear of the bin and lift it out
to remove.
To replace - Place the bin into the rail assembly.
When replacing, place the drawer bin holder into the hole of the rail
Drawer-Type
To remove the drawer - Pull the drawer out fully. Tilt up the rear
of the bin and lift it out to remove.
To relocate the drawer - Place the bin into the rail assembly.
Do not allow children to play with the refrigerator, as they could
injure themselves or damage the refrigerator.
Do not sit on the Freezer door. The door may break. Do not
allow children to climb into the Freezer basket.
injure themselves or damage the refrigerator.
Do not sit on the Freezer door. The door may break. Do not
allow children to climb into the Freezer basket.
If you remove the divider to clean the basket bin, you must reinstall the divider using 1 screw after
cleaning to prevent children from getting trapped inside the basket.
cleaning to prevent children from getting trapped inside the basket.
3
3
1
1
2
2
2
1
(RF67****)
Drawer
cAUTION
WARNING
DA68-01868P.indb 32
2010.6.29 2:31:0 PM