Samsung RT78CTBWW Manuel D’Utilisation
Safety information
_03
For R-600a refrigerant models
only
only
• This appliance contains a small amount
of isobutane refrigerant(R-600a), a natural
gas with high environmental compatibility
that is, however, also combustible. When
transporting and installing the appliance, care
should be taken to ensure that no parts of the
refrigerating circuit are damaged. Refrigerant
squirting out of the pipes could ignite or cause
an eye injury. When refrigerant leaks from
the pipe, avoid any naked flames and move
anything flammable away from the product and
ventilate the room immediately.
gas with high environmental compatibility
that is, however, also combustible. When
transporting and installing the appliance, care
should be taken to ensure that no parts of the
refrigerating circuit are damaged. Refrigerant
squirting out of the pipes could ignite or cause
an eye injury. When refrigerant leaks from
the pipe, avoid any naked flames and move
anything flammable away from the product and
ventilate the room immediately.
- Failing to do so may result in fire or explosion.
In order to avoid the creation of a flammable
gas-air mixture if a leak in the refrigerating
circuit occurs, the size of the room in which
the appliance may be sited depends on the
amount of refrigerant used. Never start up an
appliance showing any signs of damage. If in
doubt, consult your dealer. The room must be
1 m
gas-air mixture if a leak in the refrigerating
circuit occurs, the size of the room in which
the appliance may be sited depends on the
amount of refrigerant used. Never start up an
appliance showing any signs of damage. If in
doubt, consult your dealer. The room must be
1 m
3
in size for every 8 g of R-600a refrigerant
inside the appliance. The amount of refrigerant
in your particular appliance is shown on the
identification plate inside the appliance.
in your particular appliance is shown on the
identification plate inside the appliance.
SEVERE WARNING SIGNS
FOR INSTALLATION
• This refrigerator must be properly installed and
located in accordance with the manual before
it is used.
it is used.
• Do not install the refrigerator in a damp place
or place where it may come in contact with
water.
water.
- Deteriorated insulation of electrical parts may
cause an electric shock or fire.
• Do not place this refrigerator in direct sunlight
or expose to the heat from stoves, room
heaters or other appliance.
heaters or other appliance.
• This appliance must be properly grounded.
Do not ground the appliance to a gas pipe,
plastic water pipe, or telephone line.
plastic water pipe, or telephone line.
- You must ground the refrigerator to prevent
any power leakages or electric shocks caused
by current leakage from the refrigerator.
by current leakage from the refrigerator.
- This may result in an electric shock, fire,
explosion, or problems with the product.
- Never plug the power cord into a socket that is
not grounded correctly and make sure that it is
in accordance with local and national codes.
in accordance with local and national codes.
• Plug the power plug into the wall socket firmly.
Do not use a damaged power plug, damaged
power cord or loose wall socket.
power cord or loose wall socket.
WARNING
WARNING
- This may result in an electric shock or fire.
• Do not plug several appliances into the same
• Do not plug several appliances into the same
multiple power board. The refrigerator should
always be plugged into its own individual
electrical which has a voltage rating that
matched the rating plate.
always be plugged into its own individual
electrical which has a voltage rating that
matched the rating plate.
- This provides the best performance and
also prevents overloading house wiring
circuits, which could cause a fire hazard from
overheated wires.
circuits, which could cause a fire hazard from
overheated wires.
• If the wall socket is loose, do not insert the
power plug.
- There is a risk of electric shock of fire.
• Connect the power plug in proper position with
• Connect the power plug in proper position with
the cord hanging down.
- If you connect the power plug upside down,
wire can get cut off and cause fire or electric
shock.
shock.
• Do not pull or excessively bend the power
cord. Do not twist or tie the power cord. Do
not hook the power cord over a metal object,
place a heavy object on the power cord, insert
the power cord between objects, or push
the power cord into the space behind the
appliance.
not hook the power cord over a metal object,
place a heavy object on the power cord, insert
the power cord between objects, or push
the power cord into the space behind the
appliance.
- When moving the refrigerator, be careful not to
roll over or damage the power cord
- This may result in an electric shock or fire.
• Do not use a cord that shows cracks or
• Do not use a cord that shows cracks or
abrasion damage along its length or at either
end.
end.
• If the power cord is damaged, have it replaced
immediately by the manufacturer or its service
agent.
agent.
• Do not bend the power cord excessively or
place heavy articles on it.
• When moving the refrigerator, be careful not to
roll over or damage the power cord.
- This constitutes a fire hazard.
• Make sure that the power plug is not squashed
• Make sure that the power plug is not squashed
or damaged by the back of the refrigerator.
• Keep the packing materials out of reach of
children.
- There is a risk of death from suffocation if
children put them on their head.
• The appliance must be positioned so that the
plug is accessible after installation.
• Do not install this appliance near a heater,
inflammable material. Do not install this
appliance in a humid, oily or dusty location, in
a location exposed to direct sunlight and water
(rain drops).
appliance in a humid, oily or dusty location, in
a location exposed to direct sunlight and water
(rain drops).
• Do not install this appliance in a humid, oily or
dusty location, in a location exposed to direct
sunlight and water (rain drops).
sunlight and water (rain drops).
DA68-02636G-04.indb 3
2015. 7. 3. �� 9:06