Samsung ProXpress C3060FR Farblaser-Multifunktionsgerät Manuel D’Utilisation
Wireless network setup
183
2. Using a Network-Connected Machine
When you set the wireless configuration manually, click Advanced Setting.
•
Enter the wireless Network Name: Enter the SSID of the access point
(SSID is case-sensitive).
•
Operation Mode: Shows the Infrastructure.
•
Authentication: Select an authentication type.
Open System: Authentication is not used, and encryption may or may
not be used, depending on the need for data security.
Shared Key: Authentication is used. A device that has a proper WEP key
Shared Key: Authentication is used. A device that has a proper WEP key
can access the network.
WPA Personal or WPA2 Personal: Select this option to authenticate the
WPA Personal or WPA2 Personal: Select this option to authenticate the
print server based on the WPA Pre-Shared Key. This uses a shared secret
key (generally called Pre Shared Key pass phrase) that is manually
configured on the access point and each of its clients.
•
Encryption: Select the encryption. (None, WEP64, WEP128, TKIP, AES)
•
Network Key: Enter the encryption network key value.
•
Confirm Network Key: Confirm the encryption network key value.
•
WEP Key Index: If you are using WEP Encryption, select the appropriate
WEP Key Index.
The wireless network security window appears when the access point has
security enabled.
Enter the Network Key of the access point (or router).
12
The window showing the wireless network setting appears. Check the
settings and click Next.
settings and click Next.
•
You can start Wi-Fi Direct by using the control panel (see "Setting up Wi-
Fi Direct" on page 186).
Fi Direct" on page 186).
•
Wi-Fi Direct Name
: The default Wi-Fi Direct Name is the model name
and the maximum length is
23
characters.
•
Password setting
is the numeric string, and the size is 8 ~ 64 characters.
13
The Wireless Network Setting Complete window appears. Click Next.
14
When the wireless network settings are completed, disconnect the USB
cable between the computer and machine. Click Next.
cable between the computer and machine. Click Next.
15
Follow the instructions in the installation window.