Samsung 1000 W 5.1Ch Blu-ray Home Entertainment System J5150 Manuel D’Utilisation

 - English

Settings

Setting the Movie Frame (24 fps) feature to Auto 

lets the product adjust its HDMI output to 24 
frames per second automatically for improved 
picture quality if attached to a 24 fps compatible 
TV.

 

You can enjoy the Movie Frame (24 fps) feature 

only on a TV supporting this frame rate.

 

Movie Frame is only available when the product 
is in the HDMI 1080p output resolution modes.

Lets you set the colour space format for the HDMI 
output to match the capabilities of the connected 
device (TV, monitor, etc).

Lets you set the product to output video from the 
HDMI OUT jack with Deep Colour. Deep Colour 
provides more accurate colour reproduction with 
greater colour depth.

Lets you improve picture quality when viewing 
DVDs.

Lets you adjust the following speaker settings and 
turn the speaker test on and off so you can test 
the speakers.

Level: Lets you adjust the relative loudness of 

each speaker from 6dB to -6dB. For example, 
if you like deep bass, you can increase the 
loudness of the subwoofer by 6dB.

distance: Lets you adjust the relative distance 

of each speaker from the listening position 
up to 9 meters. The farther the distance, the 
louder the speaker will be.

Speaker Test: Lets you run the Speaker Test 

function so you can test your adjustments. Setting 
Speaker Test to On turns the Speaker Test on. 

Setting it to Off turns it off.

Lets you select which speakers you want active, 
either the TV's speakers or the home cinema's 
speakers.

Set Equaliser Mode on to use the equaliser.

Equaliser Settings
Lets you set the equaliser.

✎

Equaliser Settings only appears when 
Equaliser Mode is On.

Lets you direct the sound from the TV to the 
Home Cinema speakers. Requires an HDMI 
connection and an Audio Return Channel (ARC) 

compatible TV.

 

If Audio Return Channel is set to on and you are 

using an HDMI cable to connect the product to 
the TV, digital optical input will not work.

 

If Audio Return Channel is set to Auto and 

you are using an HDMI cable to connect the 
product to the TV, ARC or digital optical input is 
selected automatically.

Lets you set the digital Output to match the 

capabilities of the AV receiver you’ve connected to 
the product. For more details, please refer to the 
digital output selection table. (See page 32)

Lets you apply dynamic range control to Dolby 
Digital, Dolby Digital Plus, and Dolby TrueHD audio.

Auto: Automatically controls the dynamic range 

of Dolby TrueHD audio, based on information 
in the Dolby TrueHD soundtrack. Also turns 
dynamic range control off for Dolby Digital and 
Dolby Digital Plus.

Off: Leaves the dynamic range uncompressed, 

letting you hear the original sound.

On: Turns dynamic range control on for all three 

Dolby formats. Quieter sounds are made louder 
and the volume of loud sounds is reduced.