Samsung GGH SBS with Water Dispenser, 637 L Manuel D’Utilisation

Page de 40
18_
 
operating
18_
 
operating
4. Once you have completed this process, hold the 
Ice Off button simultaneously for 3 seconds to 
reset the filter schedule.
5. Lastly, run about 3L of water through water 
dispenser and throw away. Make sure that water 
flows clearly again before drinking.
6. See installing the water filter instructions page 11.
A newly installed water fi lter cartridge may cause 
water to briefl y spurt from the water dispenser. This 
is due to air getting into the line. It should pose no 
problem to operation.
Ordering replacement fi lters
To order more water fi lter cartridges, contact your 
authorized Samsung dealer.
USING THE DOORS
The refrigerator doors are equipped with a door 
opening and closing feature that ensures that the 
doors close all the way and are securely sealed.
After opening beyond a certain point, the door will 
“catch” and remain open. When the door is ajar 
ahead of the catch that allows it to stay open, it will 
close automatically.
CHANGING THE INTERIOR 
LIGHTS
Changing the LED Type Lighting
Do not disassemble or replace the LED type 
Lighting.
To change the LED Type Lighting contact Samsung 
service center or your authorized Samsung dealer.
CHANGING THE WATER FILTER 
To reduce risk of water damage to your 
property DO NOT use generic brands of water 
fi lers in your SAMSUNG Refrigerator.
USE ONLY SAMSUNG BRAND WATER FILTERS.
SAMSUNG will not be legally responsible for any 
damage, including, but not limited to property 
damage caused by water leakage from use of a 
generic water fi lter.
SAMSUNG Refrigerators are designed to work 
ONLY WITH SAMSUNG Water Filter.
The “Filter Indicator” light lets you know when it is 
time to change your water fi lter cartridge.
To give you preparation time to get a new fi lter, the 
red light will come on just before the capacity of the 
current fi lter runs out. Changing the fi lter on time 
provides you with the freshest, cleanest water from 
your fridge.
1. Remove the water filter from the box and 
put a month indicator sticker on the filter 
as shown. Place a sticker on the filter 
that dates six months in the future. For 
example, if you are replacing the water 
filter in March, put the “SEP” (September) 
sticker on the filter to remind you to 
replace in September. Normal filter life is 
about every 6 months.
2. Remove the new filter’s protective cap and remove 
the old filter.
3. Position and insert the new filter into the filter 
housing. Slowly turn the water filter clockwise to 
align with the printing mark on the cover, locking 
the filter in position. Make sure to align the water 
filter label mark with the center of cover filter 
printing as illustrated. Remember, do not over-
tighten.
CAUTION
WARNING
1
2
3
Turn until the 
Turn until the 
label aligned.
label aligned.
Cover filter
Cover filter
Sticker
Sticker
(month indicator)
(month indicator)
DA99-01745K-14.indb   18
DA99-01745K-14.indb   18
15. 5. 22.   
 9:17
15. 5. 22.   
 9:17