Samsung GGH SBS with Water Dispenser, 637 L Manuel D’Utilisation

08_

 

setting up

08_

 

setting up

Be careful not to miss the parts of refrigerator.

3. Next, remove the door from the lower hinge 

6

 by 

carefully lifting the door straight up 

7

.

Be careful not to pinch the water tubing and 
wire harness on the door.

4. Remove the lower hinge 

8

 from the bracket 

9

 

by gently lifting the lower hinge upwards.

2. Insert the 2 clips in the install pack and check that 

each clip holds the line firmly.

Do not cut the water line. Gently separate it 
from the coupler.

Removing the freezer door

A few things to mention fi rst.
•  Make sure that you lift the door straight up so the 

hinges are not bent or broken.

•  Be careful not to pinch the water tubing and wire 

harness on the door.

•  Place doors on a protected surface to prevent 

scratching or damage.

1. With the Freezer door closed, remove the upper 

hinge cover 

1

 using a screwdriver, and then 

disconnect the wires by gently pulling them apart 

2

.

2. Remove hinge screws 

3

 and the ground screw 

4

 by turning counter-clockwise, and take off the 

upper hinge 

5

. Be careful that the door does not 

fall on you as you are removing it.

1

2

- on some models

- on some models

5

4

3

6

7

9

8

clip A (1/4”)

clip A (1/4”)
(6.35mm)

(6.35mm)

DA99-01745K-14.indb   08

DA99-01745K-14.indb   08

15. 5. 22.   

 9:17

15. 5. 22.   

 9:17