Samsung BD-J5500E Manuel D’Utilisation

Please contact your ISP to find out if your IP 

address is static or dynamic. If it is dynamic 

- and most are - we recommend using the 

Auto procedure for network setup. This is 

easiest and will work in the majority of cases. 

If it is static, you must use the manual set up 

procedure.

Network setup directions start below.

NotES

 

✎

This unit can only be connected to a Network 

 `

via a wired connection.

Wired Network Settings

In the Home menu, press the ▲▼◄► 

1. 

buttons to select Settings, and then 

press the v button.
Press the ▲▼ buttons to select 

2. 

Network, 

and then press the v button.
Press the ▲▼ buttons to select 

3. 

Wired 

Network Settings, and then press the 

 button. The Wired Network Settings 

screen appears.

Picture
Sound

Network

System
Language
Security
General
Support

Settings 

Wired Network Settings

Internet Protocol Setup  : Auto 

IP Address 

:  0

 

0

 

0

 

0  

Subnet Mask 

:  0

 

0

 

0

 

0

Gateway 

:  0

 

0

 

0

 

0

 

DNS 

: Auto

DNS Server 

:

 

0

 

0

 

0

 

0

 

 Move  " Select  ' Return

In the Internet Protocol Setup field, select 

4. 

Auto if it is not selected. (Press v to 

select Auto, and then press v.)

Press the ▲▼ buttons to select 

5. 

Manual, 

and then press the v button.

Press the ▼ button to go to the first entry 

6. 

field (IP Address).

Use the number buttons on your remote 

7. 

to enter numbers.

When done with each field, use the ► 

8. 

button to move to the next field. You can 

also use the other arrow buttons to move 

up, down, and back.

Enter the 

9. 

Ip Address, Subnet Mask, and 

Gateway values in the same way.

Press the ▼ button to go to 

10. 

dNS.

Press the ▼ button to go to the first DNS 

11. 

entry field. 

Enter the numbers as above.

12. 

Press the 

13. 

REtuRN button on your 

remote control.

Run a Network Test to ensure the player 

14. 

has connected to your network.

Network test

Use this menu item to check whether your 

network connection is working or not.

Network Status

Use to check whether a connection to a 

network and the Internet has been established.

device Name

Device Name function allows you to change 

player's name by selecting from device name 

list.

Bd-Live Internet Connection

Set to allow or prohibit an Internet connection 

when you use the BD-LIVE service.

Allow (All)

• 

 : The Internet connection is 

allowed for all BD-LIVE contents.

Allow (Valid only)

• 

 : The Internet 

connection is allowed only for BD-LIVE 

contents containing a valid certificate.

prohibit

• 

 : No Internet connection is allowed 

for any BD-LIVE content.

NotES

 

✎

What is a valid certificate?

 `

 

When the player uses BD-LIVE to send the 

disc data and a request to the server to certify 

the disc, the server uses the transmitted data 

to check if the disc is valid and sends the 

certificate back to the player.
The Internet connection may be restricted 

 `

while you are using BD-LIVE contents.

using Bd-LIVE™

Once the player is connected to the network, 

you can enjoy various movie-related service 

contents using a BD-LIVE compliant disc.

Attach a USB memory stick to the USB jack 

1. 

on the front of the player, and then check 

its remaining memory. The memory device 

must have at least 1GB of free space to 

accommodate the BD-LIVE services.
Insert a Blu-ray Disc that supports BD-

2. 

LIVE.
Select an item from various BD-LIVE 

3. 

service contents provided by the disc 

manufacturer.

NotES

 

✎

The way you use BD-LIVE and the provided 

 `

contents may differ, depending on the disc 

manufacturer.

The Auto Function acquires and fills in the 

5. 

values for Ip Address, Subnet Mask, 

etc., automatically.

NotES

 

✎

This process can take up to five minutes.

 `

After the Network Function has acquired 

6. 

the network values, press the REtuRN 

button.
Select 

7. 

Network test, and then press v 

to ensure the player has connected to 

your network.
When the Network Test is complete, press 

8. 

the REtuRN twice to return to the Main 

Menu.
If the Network Function does not acquire 

9. 

the network values, go to the directions 

for Manual Setup.

Manual Network Setup

Before you start manual network setup, you 

need the network setting values.

To get the network setting values, contact 

your ISP (Internet Service Provider) or your 

network administrator. 

In the Home menu, press the ▲▼◄► 

1. 

buttons to select Settings, and then 

press the v button.

Press the ▲▼ buttons to select 

2. 

Network, 

and then press the v button.

Press the ▲▼ buttons to select 

3. 

Wired 

Network Settings, and then press the 

 button. The Wired Network Settings 

screen appears. 

Select the Internet Protocol Setup field, 

4. 

and then press the v button.