Samsung BD-J5500E Manuel D’Utilisation

Repeat Step 4 to select and check 

5. 

additional desired item.
To remove the desired item from the list, 

6. 

press the yELLoW (C) button again. 

The check on the desired item is removed.
When done, press the 

7. 

tooLS button, 

and then select the Copy to uSB using 

the ▲▼ buttons, and then press the v 

button. The Copy to USB pop-up appears.
Use the ▲▼ buttons to select the device 

8. 

to store the copied files to, and then press 

the v button.

NotES

 

✎

Do not disconnect the device while copying is 

 `

in progress.

If you want to cancel copying, press the 

9. 

 button and then select yes. Select 

No to continue copying.
When ripping is complete, the "

10. 

Copying 

completed

." message appears. Press the 

 button to go back to the Playback 

screen.

NotES

 

✎

This function may not be supported by some 

 `

discs.
On the Copying screen, you can also choose 

 `

Select All and Deselect All.

Use 

 -

Select All to select all tracks. This 

cancels your individual track selections. 

Use 

 -

Deselect All to deselect all selected 

tracks at once.

Appendix

Before requesting service, please try the following solutions.

PROBLEM

SOLUTION

No operation can be 

performed with the remote 

control.

Check the batteries in the remote control. They may need replacing.

• 

Operate the remote control at a distance of no more than 6.1m from the 

• 

player.

Remove batteries and hold down one or more buttons for several minutes 

• 

to drain the microprocessor inside the remote control to reset it. Reinstall 

batteries and try to operate the remote control again.

Disc does not play.

Ensure that the disc is installed with the label side facing up.

• 

Check the region number of the Blu-ray Disc/DVD.

• 

Disc Menu does not appear.

Ensure that the disc has disc menus.

• 

The prohibition message 

appears on the screen.

This message appears when an invalid button is pressed.

• 

The Blu-ray Disc/DVD’s software doesn’t support the feature (e.g., angles).

• 

You’ve requested a title or chapter number or search time that is out of range.

• 

Play mode differs from the 

Setup Menu selection.

Some of the functions selected in the Setup Menu may not work properly if 

• 

the disc is not encoded with the corresponding function.

The screen ratio cannot be 

changed.

The Screen Ratio is fixed on your Blu-ray Disc/DVD.

• 

This is not a problem with the player.

• 

No audio.

Make sure you have selected the correct Digital Output in the Audio Options 

• 

Menu.

The screen is blank.

If the HDMI output is set to a resolution your TV cannot support (for example, 

• 

1080p), you may not see a picture on your TV.

Press the 

• 

 button (on front panel) for more than 5 seconds with no disc 

inside.

 All settings will revert to the factory settings.

When the factory default settings are restored, all stored user BD data is 

• 

deleted.

You can control the playback of photo content 

located on a Blu-ray disc, DVD, CD, USB 

device, or your computer. 

using the tools Menu

During playback, press the tooLS button.

Start Slide Show/ 

Stop Slide Show

Select to start or stop the slide 

show.

Slide Show Speed Select to set a slide show's speed.

Background 

Music

Select to listen to music while 

viewing a slide show.

Zoom

Select to enlarge the current 

picture. (Enlarge up to 4 times)

Rotate

Select to rotate the picture. (This 

will rotate the picture either 

clockwise or counter clockwise.)

Information

Shows the picture information.

NotES

 

✎

Depending on the disc or storage device, the 

 `

Tools menu may differ.
To enable the background music function, the 

 `

photo file must be in the same storage media 

as the music file. 

However, the sound quality can be affected 

by the bit rate of the MP3 file, the size of the 

photo, and the encoding method.
You can't enlarge the subtitle and PG graphic 

 `

in the full screen mode.