Samsung BD-J5500E Manuel D’Utilisation

NotES

 

✎

Be sure to select the correct Digital Output or 

 `

you will hear no sound or just loud noise.

If the HDMI device (AV receiver, TV) is not 

 `

compatible with compressed formats (Dolby 

Digital, DTS), the audio signal outputs as PCM.

Regular DVDs do not have BONUSVIEW audio 

 `

and Navigation Sound Effects.

Some Blu-ray Discs do not have BONUSVIEW 

 `

audio and Navigation Sound Effects.

If you play MPEG audio soundtracks, the audio 

 `

signal outputs as PCM regardless of your 

Digital Output selections (PCM or Bitstream).

If your TV is not compatible with compressed 

 `

multi-channel formats (Dolby Digital, DTS), the 

player may output PCM 2ch downmixed audio 

even though you selected Bitstream (either Re-

encoded or Unprocessed) in the setup menu.

If your TV is not compatible with PCM sampling 

 `

rates over 48kHz, the player may output 48kHz 

downsampled PCM audio even though you set 

PCM Downsampling to Off.

pCM downsampling

Lets you choose to have 96KHz PCM signals 

downsampled to 48KHz before they are 

outputted to an amplifier. Choose on if your 

amplifier or receiver is not compatible with a 

96KHz signal.

dynamic Range Control

Lets you apply dynamic range control to 

Dolby Digital, Dolby Digital Plus, and Dolby 

TrueHD

 audio.

Auto

• 

 : Automatically controls the dynamic 

range of Dolby TrueHD audio, based 

on information in the Dolby TrueHD 

soundtrack. 

Also turns dynamic range control on for 

Dolby Digital and Dolby Digital Plus.

Configuring your Network 

Connection

Before you begin, contact your ISP to find out 

if your IP address is static or dynamic. If it is 

dynamic, and you have a wired or wireless 

network, we recommend using the Automatic 

configuration procedures described below. 

If you are connecting to a wired network, 

connect the player to your router using a 

LAN cable before you start the configuration 

procedure. 

If you are connecting to a wireless network, 

disconnect any wired network connection 

before you begin. 

To begin configuring your network connection, 

follow these steps:

Wired Network

Wired - Automatic

 

Ğ

In the Home screen, select 

1. 

Settings, and 

then press the v button.
Select 

2. 

Network, and then press the v 

button.
Select 

3. 

Network Settings, and then press 

the v button.
Select 

4. 

Wired in the Network Settings 

screen, and then press the v button.
Select 

5. 

Connect button, and then press 

the v button. The product detects the 

wired connection, verifies the network 

connection and then connects to the 

network.

Wired - Manual

 

Ğ

If you have a static IP address or the 

Automatic procedure does not work, you'll 

need to set the Network Settings values 

manually.
Follow Steps 1 and 2 in Wired - Automatic, 

and then follow these steps:

Select 

1. 

Network Status. The player 

searches for a network, and then displays 

the connection failed message.
On the bottom of the screen, select 

2. 

Ip 

Settings, and then press the v button.  

The IP Settings screen appears.
Select the IP Setting field, and then press 

3. 

the v button.
Select 

4. 

Enter manually in the IP Setting 

field, and then press the v button.
Select a value to enter (

5. 

Ip Address, for 

example), and then press the v button.  

Use the number keypad on your remote 

control to enter the numbers for the value. 

Use the ◄► buttons on the remote 

control to move from entry field to entry 

field within a value. When done with one 

value, press the v button.
Press the ▲ or ▼ button to move to 

6. 

another value, and then enter the numbers 

for that value following the instructions in 

Step 5. 
Repeat Steps 5 and 6 until you have filled 

7. 

in all values.

NotES

 

✎

You can get the Network values from your 

 `

Internet provider.

When finished entering all the values, and 

8. 

then press the REtuRN or ExIt buttons. 

The player verifies the network connection 

and then connects to the network.

off

• 

 : Leaves the dynamic range 

uncompressed, letting you hear the original 

sound.

on

• 

 : Turns dynamic range control on for 

all three Dolby formats. Quieter sounds 

are made louder and the volume of loud 

sounds is reduced.

downmixing Mode

Lets you select the multi-channel downmix 

method that is compatible with your stereo 

system. You can choose to have the player 

downmix to normal stereo or to surround 

compatible stereo.

To begin setting up the network connection 

for your player, follow these steps:

In the Home menu, press the ▲▼ ◄► 

1. 

buttons to select Settings, and then 

press the v button.
Press the ▲▼ buttons to select 

2. 

Network, 

and then press the v button.
Press the ▲▼ buttons to select 

3. 

Network 

Settings, and then press the v button.
Press the ▲▼ buttons to select 

4. 

Network 

type, and then press the v button.
Press the ▲▼ buttons to select 

5. 

Wired or 

Wireless, and then press the v button.
Go to the next section.

6.