Samsung RB34FERCDSA Manuel D’Utilisation

 

setting up

7.  Lay the refrigerator carefully. 

Remove the Leg ( 

1 ) and the Hinge Low ( 2 ).

8.  Remove the screw ( 

1 ) on the bottom right 

side of fridge and freezer door. Switch Lever 
Auto Closer ( 

2 ) from right to the left.

9.  Assemble the Middle hinge by the Phillips Head 

(+) screwdriver. First of all, assemble the Freezer 
door and Hinge Mid. And then assemble Hinge 
Low and Fridge Door with Assy Hinge Up.

Assembling procedure of the Door

•  Hinge Mid → Freezer Door → Hinge 

Low → Fridge Door with Assy Hinge Up

Be careful not to injure yourself during 
operation.

10. Switch the position of Bottom hinge and Leg 

(Right → Left). 
Assemble the Hinge Low after putting the 
Freezer Door in the middle hinge.

•  Disassemble the Guide auto close and 

the Shaft-hinge ( 

1 ).

•  Assemble the Shaft-hinge and the the 

Guide auto close like this Picture.

•  Put the Cap Cover Control Panel ( 

2 ) 

out from the Cover Control Panel ( 

3 ) 

like the Picture.

11. After removing a Cover control ( 

1 ), switch the 

Wire door ( 

2 ) direction to opposite side on 

Fridge Door (Display model only). 
Assemble the Cover-Control with Screw ( 

A ) 

like a Picture ( 

3 ). 

( 2 )

( 1 )

( 2 )

( 1 )

( 3 )

( 2 )

( 1 )

( 2 )

( A )

( 1 )

( 3 )

( B )

DA68-02833S-12.indb   20

2014. 5. 27.   �� 5:19