Samsung CE289STS Manuel D’Utilisation

  O

VEN FEA

TURES

Depending on the model that you have purchased, you are supplied with several 

accessories that can be used in a variety of ways.

1.  Roller ring, to be placed in the centre of the oven.

Purpose:  The roller ring supports the turntable.

2. Turntable, to be placed on the roller ring with the centre 

fitting on to the coupler.

Purpose:  The turntable serves as the main cooking 

surface; it can be easily removed for cleaning.

3.  High rack, Low rack, to be placed on the turntable.

Purpose:  The metal racks can be used to cook two dishes 

at the same time. A small dish may be placed 

on the turntable and a second dish on the 

rack. The metal racks can be used in grill, 

4.  Crusty plate, see page 22.

Purpose:  The crusty plate is used to brown food better 

in the microwave or grill combination cooking 

modes. It helps keep pastry and pizza dough 

crisp.

oven use

Microwaves are high-frequency electromagnetic waves; the energy released enables 

food to be cooked or reheated without changing either the form or the colour.

You can use your microwave oven to:

•  Defrost

•  Reheat

•  Cook

Cooking principle.

1.  The microwaves generated by the magnetron reflected at 

cavity and are distributed uniformly as the food rotates on 

the turntable. The food is thus cooked evenly.

2.  The microwaves are absorbed by the food up to a depth of 

about 1 inch (2.5 cm). Cooking then continues as the heat is 

dissipated within the food.

3.  Cooking times vary according to the container used and the 

properties of the food:

•  Quantity and density

•  Water content

•  Initial temperature (refrigerated or not)

As the centre of the food is cooked by heat dissipation, cooking continues even 

when you have taken the food out of the oven. Standing times specified in recipes 

and in this booklet must therefore be respected to ensure:
•  Even cooking of the food right to the centre.

•  The same temperature throughout the food.

CE289STS_HC_DE68-04126Q-01_EN.indd   13

2015-10-29     10:29:14