Samsung RFG28MESL Manuel D’Utilisation

 

operating

1.   Normally the filter indicator is blue,

yellow, or green when you purchase or
install your refrigerator, depending on
your model.

2.  After you use about 1020 L of water,

the filter indicator turns Light Pink.
(about 5 months)

3.  After you use about 1135 L of water,

the filter indicator turns Red. (about
6 months) The icon will blink red for
several seconds when you open or
close the door.

4.   Remove the old water filter and install a

new one when the filter indicator is red.
Reset the filter indicator by pressing
Alam/Hold 3 sec for Filter Reset button
for 3sec.

•  If water is not dispensing or

dispensing slowly, you need to
replace the water filter because
the water filter is clogged.

•  Some areas have large amounts

of lime in their water, which
causes the water filter to clog
more quickly.

(Reset the 

indicator)

(Red)

USING THE CONTROL PANEL

The basic temperature and/or recommended
temperature of Freezer and Refrigerator
Compartments are -19°C and 3°C respectively.
If the temperature of Freezer and Refrigerator
Compartments are too high or low, adjust the
temperature manually.

The Freezer temperature can be set between -14ºC
and -22ºC to suit your particular needs. Press
the Freezer button repeatedly until the desired
temperature is shown in the temperature display.
The temperature will move 1°C degrees with each
press (-19°C → -20°C → -21°C → -22°C → -14°C →
-15°C → -16°C → -17°C → -18°C → -19°C). Keep
in mind that foods like ice cream may melt at 0°C.
The temperature display will move sequentially from
-22°C to -14°C.

The Power Cool function substantially
speeds up the refrigerator compressor,
causing the refrigerator to cool down
rapidly to a temperature you choose. When
you press the Power Cool button, the
Power Cool icon lights up.
Power Cool is useful if you need to quickly
cool items or need to cool the refrigerator
rapidly if it has warmed dramatically (for
example, if the door was left open).
To turn off Power Cool, press the Power
Cool button again. Power Cool turns off
automatically after 2 1/2 hours to decrease
energy consumption.

When you turn on Power Cool, the
refrigerator’s compressor speeds
up and is louder than during normal
operation.

If you don’t want to make more ice, press
the Ice Off button. Pressing this button
3 second locks the display panel and
dispenser buttons so the buttons can not
be used.The Child Lock icon lights up to
indicate you’ve activated the Child Lock
function.

Press the Cubed Ice or Crushed Ice
button to select the type of ice you want
dispensed. Each time you press the
button, the cubed and crushed ice modes
alternate and the Cubed or Crushed ice
icon lights up, indicating your selection.
If you don’t need ice, turn the function off
to save on water and energy consumption
(See Ice Off below).

(Cubed) (Crushed)

If you don’t want to make more ice, press
the Ice Off button.
The icon will light up and the Ice-Maker
stops making ice.

We recommend you stop ice making if the
following occur:

-  There is enough ice in the ice bucket.

-  You want to save water and energy.

-  Water is not being supplied to the

refrigerator.

If the ice maker function is ON, and
the water line is not connected,
there will be a water valve noise
from back of the unit. Press the
Ice Off(6) button until the Ice Off
indicator (

) illuminates.

DA99-03404E-12.indb   14

2016. 12. 2.   �� 4:33