Samsung RZ28H6165SS Manuel D’Utilisation

Page de 96
English - 12
REVERSING THE FREEZER 
DOOR
Samsung recommends that reversing of the 
door opening is only completed by Samsung 
approved Service providers. This will be on 
a chargeable basis and at the customers 
expense.
Any damage caused while attempting to 
reverse the door opening is not covered 
under the appliance manufactures warranty. 
Any repairs requested due to this 
circumstance will be completed on a 
chargeable basis at the customers expense.
Required Tools (Not provided)
Phillips Head 
Driver (+)
Flat Head 
Driver (-)
10 mm 
Socket Wrench 
(for bolts)
8 mm 
Socket Wrench 
(for bolts)
Spanner
(for hinge shaft)
5 mm Hex 
Wrench
(for bottom 
hinge shaft)
WARNING
1.  Remove 4 screws on the top of the freezer.
2.  Remove the plastic cover and make sure to 
disconnect the wire connected to it.
After removing the plastic cover, check the parts 
for reversing the door.
Be careful not to damage the electrical wires 
when removing the plastic cover. 
3.  Disconnect the wires and then remove 3 bolts.
Make sure your freezer is unplugged before 
handling electrical wires.
CAUTION
WARNING
DA68-03009G-03.indb   12
DA68-03009G-03.indb   12
15. 1. 6.   
 8:21
15. 1. 6.   
 8:21